Power & Sites · United States

When noise ordinances can't keep up with data centers

Credited to Data Center Dynamics · datacenterdynamics.com · 21h ago

Photograph · Data Center Dynamics

Alex Hornecker is Acoustic Consultant and Associate Vice President, Salas O'Brien

And why the issue around noise shouldn't be ignored

Noise has always been part of data center development, but the regulatory environment around it is changing faster than most developers realize. For years, it was reasonable to treat a local noise ordinance as a fixed target, a number developers designed against and moved past. But that assumption is breaking down because ordinances vary from town to town, with no statewide consistency.

Many ordinances haven't been touched in decades and don't reflect current technology for measuring sound. Others are moving in the opposite direction, tightening in real time as communities push back. The result is that developers are starting from zero on every project, since what satisfies one jurisdiction may not carry over to the next town, let alone the next state.

Two ordinances, two different problems

Ordinance inconsistency is most evident in how different jurisdictions define acceptable noise limits. Some ordinances set a fixed decibel ceiling that never changes. Others tie the limit to ambient conditions, most commonly using a measure called Leq, which ties allowable sound to the average sound, and occasionally L90, which caps allowable sound based on the quietest 10 percent of the day. Developers often assume a fixed limit is easier to meet, but proximity to sensitive receptors can matter more than which type of ordinance applies.

Two projects illustrate these contrasting noise regulations. One is governed by an ambient-referenced ordinance that permits no more than five decibels above the measured L90, translating to a limit of roughly 34 dBA at receptors about 1,500 feet from the site. The second, located only 300 feet from single-family homes, operates under a fixed limit of 60 dBA, a considerably more permissive number on paper. Yet because the second site sits much closer to sensitive receptors, it requires many of the same mitigation measures as the first: enclosure ratings, perimeter barrier walls, earthen berms, and sound attenuators.

The comparison highlights a point that's easy to miss when developers evaluate an ordinance in isolation. A generous decibel limit doesn't guarantee an easier project, and a strict ambient standard doesn't automatically mean the most expensive one. Distance to receptors, the type of equipment on-site, and the ordinance's structure all interact, and none of them can be assessed independently of the others.

The tonal penalty problem

Volume alone isn't the only variable that jurisdictions regulate. Transformer hum and certain fan frequencies produce tonal noise, a sound with an identifiable pitch. Tonal noise draws complaints at lower decibel levels than broadband noise of the same intensity. A growing number of localities have begun codifying that difference by imposing tonal penalties and stricter limits when a facility produces a detectable tone.

That regulatory shift changes what counts as adequate mitigation. On the 1,500-foot ambient-standard project, tonal sound from step-down transformers was significant enough that standard equipment couldn't meet the ordinance's requirements. The solution required sourcing transformers with acoustic performance beyond the default NEMA ratings. On the 300-foot fixed-limit project, the tonal component is addressed differently, incorporated into the sound attenuators already required for other equipment rather than solved through specialized procurement.

Both approaches work, but they stem from different constraints. As tonal penalties become more common, the frequency profile of what leaves a site needs to be evaluated as part of equipment selection from the outset, rather than treated as a problem to solve after a facility is already built and audible.

Scale compounds the problem

Distance and ordinance type aren't the only variables. Scale introduces its own complications, and one of the least anticipated is generator testing. Because data centers are critical infrastructure, each backup generator must be tested periodically, usually once a month, and each test typically lasts about an hour. On a small site with four or five generators, that's a brief, manageable disruption.

However, on a large campus with hundreds of generators, the cumulative testing window can consume most or all of the allowable daytime noise period under a typical ordinance. What starts as routine maintenance can approach the facility's normal daytime operating condition, and it's exactly the kind of noise nearby residents are most likely to notice, regardless of whether the facility remains technically compliant.

The broader issue is that at hyperscale, the standard approach of keeping noisy equipment away from the property line runs out of room, both physically and in terms of what mitigation alone can achieve. Acoustic modeling and CFD (or thermal and airflow) modeling are often run as sequential processes, with acoustic treatment addressed only after the equipment layout has already been set for airflow.

Adjusting equipment positioning to improve airflow can undermine a barrier's effectiveness, and vice versa. At the density of modern hyperscale facilities, solving these problems in sequence rather than together creates conflicts that are far more expensive to resolve once construction is underway.

Designing for a moving target

The regulatory environment around data center noise is tightening in some jurisdictions and fragmenting across all of them. A facility engineered against a fixed limit, an ambient standard, or a tonal penalty is really being engineered against three different definitions of acceptable noise, often within the same region.

Meeting whichever definition applies is necessary, but it isn't the same as being protected. Ordinance compliance doesn't prevent a nuisance claim, and these disputes don't always turn on technical measurements. A neighbor's attorney can play a recording of the facility for a jury, and a jury that finds it objectionable isn't bound by a decibel reading showing the site is within its limits. That exposure isn't separate from the design choices discussed here — the same decisions that determine how easily a facility can adapt to a future ordinance change also determine how much legal and reputational risk it carries in the meantime.

The facilities being designed today will operate for decades under ordinances that may look very different in five years. That flexibility, and the exposure that comes with the lack of it, depends on decisions made now: how equipment is selected, how a site is laid out, and whether acoustic and thermal modeling are treated as one design problem or two. That's a design decision, not a compliance afterthought.

Power & SitesUnited States

SK Eternix, Mastern to Develop Fuel Cell-Powered Data Center

Credited to TheElec · thelec.net22h ago

Useful

SK Eternix and Mastern Investment Management will develop a fuel cell-linked data center. The companies will flesh out the business model and assess its technical and economic feasibility.

SK Eternix said Oct. 8 it signed a memorandum of understanding (MOU) with alternative investment-focused asset manager Mastern Investment Management on Oct. 7.

The MOU was signed to develop a hyperscale artificial intelligence (AI) data center powered by fuel-cell generation facilities.

The companies will jointly pursue an independent, or off-grid, data center model in which fuel-cell generation facilities installed on the site directly supply electricity to the data center.

Fuel cells can be installed at high density even on limited sites. Their relatively short construction periods can reduce delays in securing power caused by the expansion of large-scale transmission networks. They have recently drawn attention as a power source for data centers, where electricity demand is surging with the spread of AI.

SK Eternix will oversee the supply of fuel-cell power. It will handle the entire process, from the engineering, procurement and construction (EPC) of generation facilities to establishing the power-supply structure and managing operations and maintenance.

Mastern Investment Management will oversee the overall development project. Its responsibilities will include securing data center sites and permits, reviewing development scale, design, establishing the investment structure, raising funds and attracting tenants.

Original · TheElec

Useful

SK Eternix and Mastern Investment Management will develop a fuel cell-linked data center. The companies will flesh out the business model and assess its technical and economic feasibility.SK Eternix said Oct. 8 it signed a memorandum of understanding (MOU) with alternative…

View the articleTheElec

Front Method